Cane Creek 110 Alloy 1 1/8 41/30 Crown Race

You looking to find the "Cane Creek 110 Alloy 1 1/8 41/30 Crown Race" Good news! You can purchase Cane Creek 110 Alloy 1 1/8 41/30 Crown Race with secure price and compare to view update price on this product. And deals on this product is available only for limited time.

Price: $10.25 Too low to display   

Product Feature

• Aluminum, Dual-Seal
• 30mm crown race seat diameter

Product Description

Cane Creek Crown Races

Cane Creek 110 Alloy 1 1/8 41/30 Crown Race Review

30mm interior dimension is for 1 1/8" steerer tube. Using this with an old Cane Creek S3 headset. No supplier lists any crown race available for the S3, but this is the one.
Genuine Cane Creek product, shipped immediately.

FYI, to mount it, you don't need to pay a shop or buy an expensive Park Tool. Go the hardware store, buy a length (at least 2 feet) of 1 1/4" interior diameter PVC pipe. I bought a 5 foot length for about $3.50. 1 1/4" fits over the 1 1/8" steerer tube and rests on the crown race perfectly. Use a soft mallet and tap it into place. Also, smear a little good grease on the the steerer tube where the race will sit, so you have some chance of getting it back off someday if you need to. If you don't, water will get in there, it'll corrode and that will basically weld the race to the tube, and you'll never get it off without destroying it.

Most of the consumer Reviews tell that the "Cane Creek 110 Alloy 1 1/8 41/30 Crown Race" are high quality item. You can read each testimony from consumers to find out cons and pros from Cane Creek 110 Alloy 1 1/8 41/30 Crown Race ...